Avoid Motherboards from Contact with the PC Case

For the people who love to “Do it Yourself” as far as assembling your computer is concerned, you have to consider as well that peripherals need to have the proper grounding and when you screw them to the casing, there has to be something placed in between the motherboard and the screwable areas.

When you buy a motherboard, it normally comes with static foam. Now that is not mainly used to protect the motherboard. They can be used to negate the static and ground that usually occurs when you install everything into the casing.

At times, you may not have these foam available but it doesn’t mean you cannot install the motherboard. Get some masking tape and tape the screw holes to avoid surges and electrical malfunctions. That may sound easier if you don’t have the usual foam guard to go.

So how would you know if the motherboard is grounded? Well for one, after you have installed all the PC parts, it will not turn on. No matter what you do, it will just be dead even if you play around with the connections.

Now these may sound technical but they are really simple troubleshooting techniques that anyone can learn from. It may be hard to get by at first but the fact remains that you learn from experience. It is not easy assembling a computer and with these instances, you can learn to become accustomed to it. The next time you buy a computer or consider an upgrade, at least you would know better.